Broadcom Corporation is a global leader in wired and wireless broadband
communications semiconductors. Broadcom provides manufacturers of computing and
networking equipment, digital entertainment and broadband access products, and
mobile devices with the industry's broadest portfolio of state-of-the-art
system-on-a-chip and software solutions.
Broadcom Hellas SA, a wholly owned subsidiary of Broadcom Corporation, located in
Alimos, Athens, offers the following job opportunities:
- RF/Analog IC Design Engineer (Sr. Staff engineer, IC design),
Description
The engineer will work with RF designers in Broadcom's Mobile and Platforms Group to
develop and debug chips and systems supporting high-speed mobile technologies
including EDGE (Enhanced Data Rates for GSM Evolution), WCDMA (Wideband Code
Division Multiple-Access), HSDPA (High Speed Downlink Packet Access) and LTE (Long
Term Evolution).
Responsibilities include:
- Design of Radios in various digital CMOS technologies
- Design of RFIC blocks such as LNA, power amplifier, RF Synthesizers, IF filters.
- Help with block architecture for RF design, RF board and module design, and lab
test/debugging.
Job requirements
- MS in Electrical engineering or higher degree
- 3 or more years of industry experience in Analog/RF IC Design, ideally for
wireless communication systems.
- RF transistor level design skills.
- Expertise in CMOS RF highly desirable.
- RF/Analog IC Design Engineer (Principal engineer, IC design)
Description
The engineer will work with RF designers in Broadcom's Mobile and Platforms Group to
develop and debug chips and systems supporting high-speed mobile technologies
including EDGE (Enhanced Data Rates for GSM Evolution), WCDMA (Wideband Code
Division Multiple-Access), HSDPA (High Speed Downlink Packet Access) and LTE (Long
Term Evolution).
Responsibilities include:
- Design of Radios in various digital CMOS technologies
- Design of RFIC blocks such as LNA, power amplifier, RF Synthesizers, IF filters.
- Help with block architecture for RF design, RF board and module design, and lab
test/debugging.
Job requirements
- MS in Electrical Engineering with more than 9 years of work experience (or 6
years with PhD) in Analog/RF IC Design, ideally for wireless communication systems.
- RF transistor level design skills.
- Expertise in CMOS RF highly desirable.
- RF Systems Design Engineer
(Engineer, Principal - RF Systems Design)
Description
The engineer will work within the RFIC systems architecture team in the development
and validation of cellular RFIC systems and new technology such as LTE as well as
advanced 3G systems.
Responsibilities include:
Create concepts, generate system requirements and budget analysis, create
architectures, perform simulation and analysis including the modeling of RF and
analog domain non-idealities, develop physical layer algorithms and solve system
level problems during the development and production stages of the product.
Successful candidate must have the ability to communicate with engineers of varying
backgrounds: software, digital hardware, RF IC design, operations, and marketing.
Job Requirements
- Prefer Masters in Electrical Engineering with more than 9 years of work
experience (or 6 years with PhD) in the field of RF, RFIC, RF systems, or RF
applications
- Strong knowledge of Cellular Standards such as GSM, EDGE, WCDMA, LTE.
- Must be able to analyze RF system such as receiver, transmitter with
essential parametric (power, evm, linearity, etc.)
- Understanding the trade offs of the RF systems design is essential
- ADS and/or Matlab/Simulink and/or C/C++ experience is a plus.
- Experience in Wideband single carrier or OFDM receivers is a plus.
- Strong hands on Lab skills is a plus.
- Knowledge of RFIC circuits such as PLL, LNA, Mixer, PGA, PA, etc.
Broadcom Hellas is also planning to open the following job positions in the near term.
- Digital IC Design Engineer (Principal engineer, IC design)
Description:
The engineer will work with DSP, silicon, and RF designers in Broadcom's Mobile and
Platforms Group to develop and debug chips and systems supporting high-speed mobile
technologies including EDGE (Enhanced Data Rates for GSM Evolution), WCDMA (Wideband
Code Division Multiple-Access) and HSDPA (High Speed Downlink Packet Access). Main
duties will be creation of IP cores for large SoC's in leading edge technologies.
The candidate will have the opportunity to own all aspects design through
architecture, micro-architecture, implementation, debug and timing closure. There
will also be opportunities to extend experience into other front end work such as IP
verification and integration.
Experience is required in several of these key areas:
- Architecture and micro-architecture definition and design
- RTL design (Verilog preferred)
- Synthesis
- RTL and gate level simulation and debug
- Previous experience with telecommunications
- C/C++
The current growth includes RTL design, functional verification, synthesis, PNR,
physical design verification and DFT disciplines.
Job Requirements
- Prefer MS in Electrical Engineering with more than 9 years of work experience (or
6 years with PhD)
- Self-motivated
- Understanding of wireless standards (GSM, GPRS, EGPRS , WCDMA, and LTE) is a plus
- DSP/Digital IC Design Engineer (Sr. Staff engineer, IC design)
Description:
The engineer will work with DSP, silicon, and RF designers in Broadcom's Mobile and
Platforms Group to develop and debug chips and systems supporting high-speed mobile
technologies including EDGE (Enhanced Data Rates for GSM Evolution), WCDMA (Wideband
Code Division Multiple-Access) and HSDPA (High Speed Downlink Packet Access). The
job spans pre-silicon architecture and HW/SW algorithm design/implementation/test to
chip bring-up and characterization.
Responsibilities include:
- Develop ASIC specification, architecture, and micro-architecture of signal
processing and communications algorithms
- Define and document chip requirements, architecture, verification and lab test plan
- Bit-exact system modeling and simulation
- Documentation/application note development and customer support
Job Requirements
- MS (or higher degree) in Engineering or Computer Science.
- 8 or more years of industry experience
- DSP expertise
- Strong programming skills. Knowledge of C/C++, Matlab.
- Bit-exact MATLAB and C/C++ system modeling and simulation.
- Understanding of hardware design principles and some HDL (VHDL/Verilog) literacy.
- Develop and run system level simulation suites of the transceiver and perform
vector matching verification with RTL simulations
- Understanding of wireless standards (GSM, GPRS, EGPRS , WCDMA, and LTE) is a plus.
|